HAN series power connectors.
A wide range of rectangular power connectors for industrial use.
Suitable for a varied range of electrical and mechanical applications.

HAN KIT (widely used screw connector styles).

HAN MODULAR (customized modular connector, suitable for the combination of auxiliary and power contacts, radio frequency applications, optical fibers, compressed air).

HAN SNAP (for connectors mounted inside electrical panels where no IP65 protection is required).

HAN COM (for high currents up to 100A).

Connectors for printed boards compliant with DIN 41612 standard; 2.54 mm pitch; 2.5 mm metric pitch in compliance with DIN 41642.

DIN 41617.
A wide range of configurations with terminations that can be welded; seam welded and crimped. Terminations with fast-on; cage clamps; insulation perforation and press-in styles. Codifying systems, fixing accessories, and housings suitable for applications in all possible electrical and electronic fields. UL and CSA certification.

I.D.C. connectors; 1.27 mm pitch, compliant with DIN 41651 and MIL-C-83503 standards.
The range of products includes connectors with a number of contacts ranging from 6 to 64. Female connectors with insulation perforation; male connectors with or without levers and low profiles; 2 or 4 rows transitions and D.I.P.; flat cables. UL and CSA certification.

D SUB connectors, compliant with DIN 41612, MIL-C-308 and IEC 807 standards. With a number of pins ranging from 9 to 50 and printed turned contacts. Terminations to be welded to printed boards; seam welded and crimped; insulation perforation and press-in.
A wide range of housings, retention systems and accessories. UL certification.